TriMark 050-0110 Two Rotor Single-Position Latch

• Applications where it is desirable to have a single position rotary latch
• Door thicknesses of 1-7/8″ or greater (47.6mm)
• Door weights of 50-200 lbs. (23-91 kg)
• Door seal pressures of 50-150 lbs. (23-68kg) (suggested for best results)
• Use with TriMark 070-0200 Striker Bolt

AVAILABLE:

• In left or right hand configurations
• With (4) 1/4-20 UNC, M6 x 1 threaded axles or .286″ (7.3mm) diameter “thru” axles
• With trip lever options (please inquire)
• Straddle mount option

FINISH:

• Zinc plated, clear chromate steel components

• Internal latch components: heat treated, smooth edge stamped steel
• Case halves: high strength steel
• Springs: non-corrosive stainless steel

INSTALLATION:

• (4) 1/4-20 UNC grade 5 or M6 x 1 class 8.8 or better fasteners are required (not included)
• Tighten to the fastener manufacturers’ recommended torque value, however, do not exceed 120 in-lbs (13.3 N-m)
• Fastener mounting holes diameter should not exceed .281″ (7.1mm)

INTERNAL LUBRICATION:

• Oven-cured dry lubricant is applied at factory on all critical moving parts

Caution: Single position rotary latches do not comply with FMVSS 206 (ECE R11) requirements.

Individual part dimensions are for reference only. Refer to individual part drawings for complete dimensions, specifications, and installation procedures. Engineering assistance and application drawings are available.