TriMark 050-0214 Slimline Latch With Inline Trip Single-Position

• Thinner, light or medium weight door applications requiring resistance to dust and vibration
• Door weights up to 75 lbs. (34 kg)
• Door seal pressures of 20-25 lbs. (9-11 kg) recommended for best results. Not to exceed 50 lbs. (23 kg)
• Visible surface installation or concealed installation
• Applications where it is desireable to have the release mechanism in line with the latch

Available

• Left or right hand configurations
• With standard .265 (6.7mm) diameter “thru” axles as shown, 1/4-20 UNC threaded axles (optional) or M6 X 1.0 threaded axles

Material

• Internal latch components: heat treated smooth edge stamped steel
• Springs: non-corrosive stainless steel
• Case halves: high strength steel

• Three 1/4-20 UNC grade 5-type or M6 x 1 class 8.8 or better fasteners are recommended
• Vertical mounting with support ramp at top is required for proper alignment and subsequent engagement of locking pawl and striker bolt

Internal Lubrication

• Oven-cured dry lubricant is applied on all critical moving parts
• Additional lubrication to be applied in the field if required

Caution: Single position rotary latches do not comply with FMVSS 206 (ECE R11) requirements.