TriMark 050-1910 8mm Single Rotor Latch With Single Position

• Applications where it is desirable to have a single position rotary latch
• Interior door thickness of 45-57mm (1.77-2.25 in.). Depending on the actuator type and location the overall height could be greater. Please contact TriMark for specific details.
• Medium to heavy duty doors of 23-81 kg (50-175 lbs.) with maximum door seal pressure of 36 kg (80 lbs.)

Features/Benefits

• Modular case construction is preconfigured with multiple actuation points on the front case allowing top/bottom actuation including stacked actuators as well as combinations of actuation points providing the most configurable rotary door latch ever designed
• Compact size and shape allows maximum use of door space and minimizes visibility issues without compromising strength and robustness
• Rotor provides for vertical clearance of strike allowing for door sag, misalignment and ease of installation
• Single position version for compartment and door hold-open for non FMVSS 206 applications
• 8mm diameter automotive style hoop-type strike minimizes clothing snag hazard

Available

• In left or right hand configurations (right hand shown)
• Versions are available to allow direct actuation from exterior push button or pull handles and interior releases providing a simple, low cost and compact application
• Platform allows for reuse of TriMark’s extensive selection of existing actuation levers reducing application engineering and tooling requirements
• Several actuator return spring options
• Coaxial actuator mechanism for applications where it is desirable to provide additional support to the actuation levers
• Innovative barrel release for ease of use/installation
• Future provisions for state sensing, power release mechanisms and slam cam door lift mechanism

• Case halves: High strength steel
• Rotor and catch: Heat treated steel
• Springs: Non-corrosive stainless steel

Finish

• Zinc plated, clear chromate steel components

Installation

• Easy to install, mounts with (2) M8 x 1.25 class 8.8 or better fasteners are required for FMVSS206 applications (not included)
• Tighten to manufacturers’ recommended torque value, however, do not exceed 22.2 N-m (180 in-lbs)

Use With

• TriMark 070-1000 8mm Hoop Strike
• TriMark 070-1300 Adjustable Striker

Individual part dimensions are for reference only. Refer to individual part drawings for complete dimensions, specifications, and installation procedures. Engineering assistance and application drawings are available.

CAUTION: Single position rotary latches do not comply with FMVSS 206 requirements